used, just rebuilt DT466 210hp engine, allison MT653, newer white, air brakes, 33KGVW, rear mount Telsta T40C cable placer bucket unit, General Cable intercom, Telsta Reel 5K reel carrier with hydraulic 1K line pull, cable lasher system, Onan 4kw diesel generator, aux, 30"x34" inside bed electric reel spooler, electric tow line winch, driver air seat, electrick brake controller, rear pintle, cab spotlight, either start, block heater, 12' service body, new aerial inspection and truck DOT, very nice truck.....

Stock# 3419, T444E Diesel 210hp, 5spd Allison World MD3060P auto,  behind cab mount Altec TA35CS squirt boom, 107K miles, A/C, works 42', man & half bucket hydraulic rotating, power windows, power locks new paint and decals, full 9' service body with compartment lights, remote controlled spotlight, very good tires, air brakes, air driver seat, great truck, new paint, new DOT inspection, new aerial inspection and dielectric certification.....

Stock# 3252, has easy entry bucket so is rated non-insulated, DT466E 225hp, A/C, Allison MT643 auto, no spin rear end, 25,500 GVW non-cdl, air brakes, air driver bucket, remote control spotlight, beacons and strobes, rear arrow board, no out riggers, Altec AT37G behind cab mounted, works 43', man and 1/2 bucket rotating with easy entry door, full service body, double frame, air dryer, block heater, 134" wheel base, new aerial inspection, new truck DOT, new full re-paint and decals, these are user friendly and from a great home.....

Stock# 3444, used Ford F550 4x4 aerial bucket truck,  119K miles, A/C, Powerstroke diesel, auto, Terex  Hi Ranger TL38P behind cab mount, no outriggers, works 44', 1 1/2 man end hung 350lb capacity bucket, upper tool circuits, insulated upper boom, 9' full service body with 32" rear deck, 6KF/13.5KR axles, 22.5/70R/19.5 tires, am/fm, PW, PL, Ladder rack, remote spotlights, compartment lights, rear work light, 2 strobes, bucket seats, new paint, new inspections and dielectrics, new Truck DOT, it has gone thru the shop and work ready....

Stock# 3359, used Ford F550 4WD aerial bucket truck, A/C, Powerstroke diesel, auto, Altec AT37G behind cab mount, 2 outriggers, works 43', 1 1/2 man end hung 350lb capacity bucket, upper tool circuits, insulated upper boom, 9' full service body with 32" rear deck, 6KF/13.5KR axles, 22.5/70R/19.5 tires, am/fm, PW, PL, cab spotlight, compartment lights, collapsible reel, rear work light, 2 strobes, bucket seats, new paint, new altec inspections and dielectrics, new Truck DOT, it has gone thru the shop and work ready, pics and info soon, walk in bucket available....108,360 miles

 

Stock# 2851, used, 122,446 miles, ex city unit, New Cummins 5.9L 230hp. in 9/2008, Allison 3060 5 spd. with retarder, A/C.,  40/60 bench seats with air driver bucket, Telelect TS373 telescopic boom with single man side bucket, 1300lb 6' material jib with hydraulic winch, 15' Telect hydraulic elevator behind cab, platform height 47',  works 53', 2 rear work lights, upper tool circuits, 3 beacons, compartment lights, 2 outriggers,  35Kgvw, 12f/23r axles, air brakes, am/fm/weatherband, rear pintle hitch, 9' full service body with 24" rear deck, 18" spacer deck between lift and front of box, 2-45 gal tanks,  new paint, aerial inspection and dielectric test, these are fantastic units and very very hard to find......

Stock# 2977, 4 x 4, 8.3L Cummins 250HP, 067,623 miles, 5,722 hours,  Allison 3060 5spd auto, transmission retarder, Rear mounted  Altec AM855 Material Handler, works 62', 1-two man bucket hydraulic rotating, 2000 lb hydraulic jib winch with hydraulic extension,  break over center unit, full service body,  4 outriggers, air brakes, hydraulic capstan winch curbside, 120 Volt inverter, air dryer, compartment lights, rear pintle, rear air,  cab spotlight, 3 strobes, 315/65R/22.5 fronts@70%, 11R/22.5 rears @90%. 39KGVW, 16F/23R, no spin rear,  New certifications, new paint and decals....

Stock# 3349, DT530E HEUI 275HP turbo diesel, 083,183, 5,890hrs, Allison MD-3060CR 5spd. auto, rear mount Altec Am855MH, works 60',  hydraulic rotating 2-1man 350lb. buckets, 2000lb. hydraulic jib winch, breakover center unit, 4 outriggers, air brakes, rear air, rear pintle hitch , 16F/23R axles,  39KGVW, 44K spring pac, NO spin rearend,  315/80R22.5 fronts@80%, 11R22.5 rears@70%, compartment lights, cruise, double frame, air dryer, New paint and New certifications, strong work truck...........

Stock #2598, Reman DT530E HEUI 275HP turbo diesel, 62,523 miles, 2629 PTO hours, Allison MD-3060CR 6spd. auto, rear mount Altec Am855MH, works 60',  hydraulic rotating 2-1man 350lb. buckets, 2000lb. hydraulic jib winch, breakover center unit, 4 outriggers, air brakes, rear air, rear pintle hitch , 14F/23R axles,  37KGVW, 44K spring pac, NO spin rearend,  315/80R22.5 fronts@80%, 11R22.5 rears@50%, 2 remote spotlights, compartment lights, cruise, double frame, air dryer, New paint and New  certifications, big power and fresher engine......

used, mechanically reconditioned & repainted in our shop, new aerial inspection, decals & dielectric test, we made this truck work ready,A/C, DT466 230hp, Allsion MD3060CR 5 spd, 21K rear axle, 14K steer drive axle, 60,400 miles, 5515 hours, 35KGVW, Altec AM855 MH rear mounted, 2 single man rotating buckets, hydraulic material jib, overcenter unit works 62', full service box, 4 outriggers,  air brakes, air transfer case, air dryer, engine heater, 194' wheel base, very nice truck.......Pics and more info soon

Crane Boom Truck, 91 International 2674,  tandem axle, 5,062 miles showing, 566B 10 ton capacity, 77' sheave height, jib head, this unit has 4 function remote control for ground control with 40' pendant cord, front and rear A frame stabilizers, 18' steel flatbed, 2 part crane block w/swivel hook, anti-two block, behind cab mount, Cummins L10 300hp, 10spd transmission, 56,000gvw, hendrickson spring suspension,  air brakes, more info soon......

used, USTC model 28L 28 ton, rear mount, 94ft main stick 26/46 2 section swing jib, 10 spd, Cat 3126B, 28,254 original miles, 5100 hours, 40k rear, 18K front, 2 spd winch, h eadache ball, e xtra 3 part crane block, 360 degree continuous rotation, electric LMI  load movement system, h endrickson spring suspension, r ider seat, 4 Hydraulic out and down stabilizer outriggers with auxiliary pads, this one is really nice.....

Tandem axle, Cummins ISM 330+, 32,627 miles, low 1990 hours,  Fuller RTOF 14909, air brakes, 21' flatbed, rear pintle, behind cab mount Terex BT4792 all hydraulic, 23.5ton, 26-44' extendable jib, sheave height 92'-145', Man platform, computer load, Remote controls, Hendrickson RT suspension, 2-A frame outriggers front, 2-down and out rear jacks, air dryer,  electric block heater, electric brake controller, headache ball, two part crane block, really ready to work with all documents, 13K$ just spent on new Terex certifications, load test, & computer upgrades etc....

Tandem axle,  A/C, Cummins N14-370E-plus, 72,540 miles, low 1294 hours,  Fuller RTOF 14909MLL-11spd w/od, air brakes, 20' flatbed, behind cab mount National 1100, 27ton,  95' 4 section, PAT DS150,  LMI, Hendrickson RT-403 suspension, 2-A frame outriggers front, 2- rear jacks, front outrigger, 58K GVW, double steering boxes, double frame, 232" WB, 4.11 ratio, air dryer,  electric block heater, two part crane block,  will be reconditioned in our shop, New crane inspections & load test, new paint, really ready to work with all documents....

Mercedes 12.8L 460hp, 57,144miles, 6217 hours, Eaton 8LL, 40K rears, 20K front, 60KGVW, air brakes, 20' flatbed, rear pintle, behind cab mount Terex BT4792 all hydraulic, 23.5ton, 26-44' extendable jib, sheave height 102'-145', Man platform, computer load, Remote controls, Tuc Trac suspension, 2-A frame outriggers front, 2-down and out rear jacks, air dryer,  electric block heater, electric brake controller, headache ball, two part crane block, will have new paint, DOT inspection, New crane inspection & load test, big boom on heavy spec truck, hard to find combination...............

Stock# 3097 shown(2 LEFT), DT530E 275hp. with retarder,  Allison 3060CD 5spd. auto, 110K miles, 8732 hours,  14'  full service body, rear mounted Altec D845 with 30,000 lb capacity, upper controls w/pin on bucket, Captain chair, 3 section hydraulic Derrick, 45' sheave height,  10' fiberglass jib 2085lbs,  turret winch,  18" auger 2 spd., 4 outriggers(2 rear radial), hydraulic tool reel, hydraulic remote controlled capstan winch curbside, 16k Marmon Harrington front axle with dual steering boxes, 23k rear axle with no spin, rear air,  rear pintle hitch, 8.5 ton swivel block, electric trailer brake controller, strobe, either start, rear work lights, air driver seat, will have new certifications, has our new paint and decals, the truck and aerial have been reconditioned in our service center and ready to work, we recondition our units not just buy and resale them, here is a high dollar truck set up right,  another 97 available......

Stock# 2814, Used production digger, 072,425 miles,  4 wheel drive,  DT530E 275HP,  Allison 3060/CR 5 spd. transmission with retarder,  Texoma Reedrill 270-12, Cummins 3.9L diesel auxiliary engine, pole tongs, spotter base, winch,  no spin rear end, air horn, tool box, 2 outriggers, 39KGVW, Ex-power company unit, air engage front axle, air engage hi-lo transfer, 90% tires all positions, 172" wheel base, double frame, dual power steering, air horns, air driver seat, cruise, new paint, top shape save  200k on this one.....

DT530E 275hp,  Allison 3060CD 6spd. with retarder auto,  107K miles, 6000 hours, 13'  full service body, rear mounted Altec D845 with 27,000 lb capacity, upper controls w/pin on bucket, Captain chair, 3 section hydraulic Derrick, 45' sheave height,  10' fiberglass jib 2085lbs,  turret winch,  18" auger 2 spd., 4 outriggers, hydraulic tool reel, hydraulic remote controlled capstan winch curbside, 16k front axle with dual steering boxes, 23k rear axle with no spin, 110 volt Brutus inverter, rear air,  rear pintle hitch, new 8.5 ton swivel block, electric trailer brake controller, strobe, either start, rear work lights, air driver seat, will have new certifications, new paint and decals, here is a high dollar truck set up right....

DT466E documented rebuild 2007,  Allison with documented rebuild, 056,472 miles,  rebuilt rear differential,  Altec D947 digger derrick rear mounted with command chair, 3 section hydraulic, upper controls, pin on bucket, 24,000lb capacity, 47' sheave height, rear air, rear trailer air, rear air pintle, tool reel, 13K front drive axle with double steering boxes, 21k rear axle, 90% front and 70% rear tires 22.5,  this is very good truck with many new expensive upgrades on drive train already done.....

Used 2001 International 4700 Digger Derrick, DT466E 215HP, 82,796 miles, 4317 hours, Ex-State of WY DOT, 6speed, 31KGVW,  Terex Telelect L4045 behind cab mounted, captains chair, upper controls, 4'x6' aluminum platform, Non-insulated 3 section, 22,000lb capacity, 46' sheave height, 16' steel flatbed, 18" single speed auger, heated mirrors, pintle hitch, either start, electric brake controller, good 11R22.5 tires, air driver seat, am/fm/weatherband, cruise, will have new paint, decals and certification, these are hard to find set up like this......

extendahoe,  cab w/Air,  24" backhoe bucket, Q/C forks, hydraulic thumb, auxiliary hydraulics rear, 2006 NPK C4C Plate compactor, ride control, auto shift, rear coupler, like new and loaded

Stock# 2842, used, Super M plus series II, 3312 hours, extendahoe, pilot controls, ride control, A/C,  50%  18" fronts, new rear 21x24, 1.25cyd loader bucket, 36" and 24" rear buckets, manual rear coupler, used allied 24 x 28 hydraulic hoe pak, very nice unit, well cared for and the M+ is the way to go and save with these extras........

Used,  2750 hours, new turbo, new engine in 2008, new tracks, hydraulic thumb, cab with heat and A/C,  long stick, front dozer, new 12" bucket, 24" bucket with new teeth, manual coupler, this is a very nice unit.....

used, Cat hydraulic thumb, Cat hydraulic coupler, 42" bucket with new teeth, 24" bucket, from a good home in very nice condition......

hydraulic 8' dozer  6-way blade,  Midwestern CXD3B sideboom @ 10K capacity, 13' working height, folding boom, will go thru the shop and be work ready, will have new paint......here is a nice compact pipelayer..

Dozer, 1991 DEERE 550G, S/N: 780272, 4120 hours, 6 way, ripper, Cab, EROPS

used, 4 post rops, power PAT dozer, ripper attachment, D3B backhoe attachment, 3800 hours, will go thru the shop, TRAILER NOT INCLUDED.....

3 unused Caterpillar PL61 pipelayers,  less than 30 hours on each machine, product link GPS already turned on & good for 3 years, 18ft booms with hydraulic counterweights, hydraulic draw works, canopy, 2 with LGP and one with standard tracks, all have SystemOne undercarriage,   Cat 6.6 Acert diesel 125hp, no derate to 9800 ft altitude, 40k lift capacity, 37k operating weight approx., Here is a deal..Just Reduced...Price is each......Photos are of unit s/n 110...call for more info...EX Works Casper Wyo. There is really no better deal for what you get for this price anywhere.

Used 1968 Cat D6C angle dozer, power tilt, s/n 10K1391, less than 500 hours on motor, trans, ring and pinion, one final, cat rail and cat extreme service pads, rear winch, sweeps, one very good dozer......

Stock # 2737, used forklift, Vortec V6 Gas, 2 stage mast, side shift, tilt, fork positioners, 1217 hours, 8000 lb lift, very good condition from power company fleet,  more info and pics soon.....

20,000LB capacity to 12', 14,000LB capacity to14',  7334 hours, cab with A/C, joy stick controls,  Cat 3116 dieselL, auto 4 spd., hydraulic frame leveler,  AL-11160 baler,  58" forks, 23.5 X 25 rubber in very good condition, cylinders clean and dry,  10' carriage, new paint, these are just mean, new are 350K+ so save big on this one.....

Stock # 2736, used forklift, Vortec V6 Gas, 3 stage mast  212",  side shift, tilt, fork positioners, 3003 hours, very good condition from power company fleet,  more info and pics soon.....

Stock# 3243 1999 Hyster H155XL2 15K capacity forklift, new 8.25x15 rough tread tires all 6 positions, new paint, side shift, hydraulic fork positioners, diesel, forward/reverse shuttle, 19,800lb E.W., lights, 133" load height, see thru mast, buy or long term rental, very nice unit, 3570 hours.....

6000 lb lift, side shift, new 19.5x24 drive tires, new head, in-frame, 5500 original hours, light package, 12x16.5 steer tires 90%, 4' forks, 5' carriage ITA, suspension bucket seat, 22' lift height, 4 spd with F/R shuttle, 4 post ROPS, very nice unit.....

1221 hours, perkins diesel, 252" lift height, 48" forks, side shift, free mast, 45degree tilt option, 15-19.5 front & 12-26.5 rear tires, new paint and gone thru the shop, very nice unit......

Stock# 3266  used, 1145 hours, perkins diesel, 120" lift height, 6' clearance, 48" forks, side shift, freelift mast, F/R shuttle, 10 degree tilt back, 12,425 E.W., new paint and has been thru the shop, 15x19.5 drive tires, 12-16.5 steers, lights, 4 post rops, runs out well on rough terrain and small clearance areas....

stock #2986, used, 3932 hours, 9000 lb lift, 3 section 45' boom, new paint, new front tires, 70% rears, 4x4 with rear steering, lights, very nice unit......

Used Caterpillar 140G Motor Grader,  72V series,  Rear ripper, top con plumbed, front push block, will have new tires, Lo pro cab with heat, 14' moldboard, is going thru the shop to catch the TLC stuff and will be ready to work......

used, John Deere 570B motor grader, front scarifier, articulated, side shift, blade pitch, cab with heat, 15.5 x 25 tires, newer paint, been thru the shop ready to work......

Grader, 1994  Cat 140G  VHP,  low low 6194 hours,  low pro cab/AC,  rear ripper/scarifier,  front balderson lift group, 12' hydrualic angle dozer,  articulated,  good  radial tandem tires , full oil records,  here is a no brainer,  very nice unit....

used, ex-county, cab with heat and A/C, rear ripper, 14' moldboard, 14R24 snow tread, all wheel drive, hydraulics to front,  new transmission at 3675 hours as a warranty item, PIP udates done Jan 2003, been thru the shop, low hour machine ready to work, will have new paint......

Ex-county, Documents, less then 1200 hours on John Deere Rebuilt Engine and Transmission, 7376 original hours, rear ripper, front scarifier, hydraulic snow wing, Cab with A/C, very good 17.5R25 tires, this is one of the best in the country......

Used 1982 Thiokol DMC1450 tracked snowcat, 678 hours, ex-phone company unit, 3spd. auto transmission, Ford 6cyl. 104hp gas engine, 2 seater, enclosed rear box, new tracks 2006,  with 1983 Maxey tandem axle 10Kgvw trailer with ramps, this is in very good condition....

Stock # 2812, used, new crate engine in 1990 cat 3208 diesel, 11 yd., 7153 hours, been thru the shop, good tires, diff lock, new bits, dry cylinders, nice unit.....

2 available, used, duetz diesel, 12" drum, portable, 7.50/16LT tires 80%, new paint, been thru the shop, these are production units ready to work......

Used, dual fuel,  rough terrain, works 56', hydraulic leveling outriggers, 4x4, will have new paint and decals, very nice unit.....pics and more info soon

super nice dual fuel, 1932 hours, new paint, great tires, works 51', nice condition and ready to work.....

diesel, 2959 hours, extendable axle, on board generator package, nice tires, 8' platform, unit has been through the shop, nice, tight and runs out strong.....

2003 Genie GS2632 electric scissor lift, 212 low hours, new batteries, new charger, one of the nicest around......

Stock # 3177, mechanically reconditioned & repainted in our shop, we made this unit work ready, Ford 4cyl., hydraulic leveling, new decals, new inspections, very popular model and in very nice condition......

used only 95 hours, 23 hp diesel, 3 speed hydrostatic, 17hp@pto, hydraulic top link and side link, quick attach LA403 loader, 540 rpm rear pto, 2500rpm mid pto,  rear auxiliary hydraulics, Landpride RBT1572 rear 3pt blade, box scraper/scarifier, 3pt rock tine rack, perfect size & literally new....

used still under warranty, 3 hours, 62PTO hp.,. 4x4, A/c cab, dual remotes, 12F/12R spd., forward reverse shuttle, am/fm/cd,  Inveco diesel, cat II 3 point, 16.9R30 rears, 11.2R24 fronts, am/fm/cd, wow.....

used, 1117 hours, 4x4, 4 post rops, Duetz Diesel new bearings@ 820 hrs., 6 way front blade, dual axle steer, crummer, 38/18.00-20 tires@ 20%, will go thru the shop and ready to work, more info soon......

used, R40 trencher, Wisconsin, front and rear steer, 6 way blade, heavy duty chain with cup teeth, two new tires, two good tires, wheel weights, been in my family for 25 years, very good condition....

used 1999 Bobcat 863F skid steer loader, 2429 hours, reconditioned, new seat, 2 new tires, Hi-flow, cab, has Bobcat 811 model backhoe attachment 11ft digging depth, has bucket, here is a nice set up......

Stock # 3052, used skid steer loader, 2000 Bobcat Model 763G, Kubota 4 cyl diesel 46hp, 1789 hours, 80% 10-16.5 tires, new seat, nice size and tight unit......

Stock # 3088, used Cat 277 multi-terrain track skid steer loader, turbo, cab with heat, new 18" heavy duty cleat tracks, many new undercarriage upgrades, 1982 hours, 74" bucket with teeth, nice tight unit......

1500 hours, cab with Heat/AC, new tracks, rebuilt under carriage, hydraulic coupler, will have new paint, will have new cat 78" bucket, loaded and shop has got it work ready.....

used, 1048 hours, 66" tooth bucket, good tracks, now has cab and new heat system, been thru the shop, nice tight unit......

Used, articulated, 3.25cy. bucket with bolt on edge, 11,350 hours, 172 hp.,  hydraulic quick coupler, w/ 48" x 60" fork attachment,  20.5x25xL2 tires @85%, cab with air and heat,  2 lever controls, ride control, work lights front and rear, wipers front and rear, am/fm radio, ready to work......

2000 JOHN DEERE 544H, articulated , 3.0cy., cab w/heat/air, light package, JRB hydraulic quick coupler, bucket with new edge, 20.5x25xE3 rubber  40-85%,  8000 hours, new paint and decals, nice and tight......

Used, 9015 hours, cab, coupler, forks, bucket, have records, from a good home, very nice and tight loader, been thru the shop, more pics soon........

used, Cab with A/C, 75% radial 20.5 tires, with forks, with bucket, been thru the shop, nice loader ready to work from a good home, newer pics soon with the unit all detailed out......

Used, 2917 hours, A/C, 50-60% 20.5R25 tires, Cab with heat, 2.7CYD bucket with bolt on edge, auxiliary hydraulics, Evergreen load scale, nice unit with low hours, will go through the shop......

Stock # 2769, used wheel loader, JRB coupler, Q/C 3.5 cyd bucket with  new bolt on edge, 13,460 hours, forks available,  cab with air, New 20.5 x 25 tires, ride control,  been through the shop, new pins and bushings on articulation,  nice condition and will be ready to work.................

2004 Volvo L60E 4 x 4 wheel loader, Quick coupler, Q/C forks, 2.5 yd Q/C bucket, A/C, auxiliary 3rd valve, coupler, 80% 20.5r25 tires, am/fm/cd., light package, wiper package, beacon, single acting lift function, boom suspension system, raised pressure attachment locking, auxiliary attachment locking, Bolt on cutting edge, really nice unit....

quick coupler, 3.5 cubic yard bucket, 5' fork attachment, cab with heat & A/C, boom suspension, bucket kickout, engine brake, am/fm/cd,  has 750/55x26.5 20ply tires @ 95% or will change out to very good 20.5x25 tires and new wheels, 6300 hours, been through the shop and all checked out, these are a nice loader and heavy enough to do the work.....

SOLD

used, 185cfm, John  Deere 4045 engine, nice unit, 2773 hours....

Stock# 3226, new paint, new tires, John Deere diesel, all checked out in the shop and ready to put on the job....

Stock# 3381, very nice  2003 Ingersoll Rand P185WJDU 185cfm utility air compressor, 1212 hours, John  Deere turbo diesel, ex-power company unit......

used, 150 psi @ 375CFM, cat powered, 3541 hours, new paint, serviced ready to work, hard to find higher pressure compressor.....

stock# 3124, like new 2007 Ingersoll Rand portable air compressor, John Deere diesel, 185cfm, 50 original hours, from power company,  dual retractable hose reels with hose.....

S/N: 383453, 50000 hours, 625 KW Gen set. natural gas generator package, Kato 900 rpm 625 KW, 4160 volt generator end, Cec electronic ignition system, ebullient cooling, 8 weight crank, excellent core...located in Boise Idaho..

used portable 3 axle fully enclosed Cat SR4B generator set, 5240 hours, 400KVA, 320KW prime, Cat 3406 14.6L turbo diesel, 480 volt 3phase/481 amps, 240 volt 3phase/962 amps, 208 volt 3phase/982 amps, 120 volt 1phase tap/70amps, 50amp 240 volt, 15amp/120 volt GFCI, MCS battery charger, 18' diamond plate 3 axle Diamond Trailer, surge brakes, low hours, will have new load test.........

used, 2017 hours showing, 65KVA, 52KW, sound attenuated enclosure, tandem axle trailer, 200+ gals in on board and trailer auxiliary fuel cell, John Deere 4045TF diesel, 120/240 1phase, 277/480 3 phase, 120/208/139/240 3 phase, nice unit.......

Used Hydratail trailer, 48' length, 10' front deck, 30' main deck, 8' hydraulic tail with 4' fold under, (unfolds to 12' approach), 102" width,  35 ton,  two air braked axles, spring suspension,  hydraulic winch, hardwood deck, front hydraulic transition deck/ramp, stake pockets, Will have new paint and decals, these are so handy....new pics soon....

Used 2000 Ledwell Hydratail trailer, steel construction, 48' length, 10' front deck, 30' main deck, 8' hydraulic tail with 4' fold under, (unfolds to 12' approach), 102" width,  50 ton,  three (3) air braked axles, air ride suspension,  hydraulic winch, hardwood deck, Side rails with stake pockets, Has new black paint and decals, hard to find....new pics soon....

like new model 553SS, air lift 3rd axle, 129,500GVW, 100K in 16', 110K in 24', 13hp Honda pony motor quick coupled, 24 side extensions, d rings, 24' deck, 14' rear deck, 10' front with full fenders, 85% 255/70R/22.5 tires, very nice trailer offering years of service......

Used Model 353WDMR tandem axle removable gooseneck with 3rd flip axle, 29' deck,  9'10"  neck, 9' 2" rear deck, 14-14" outriggers, 9 D-rings each side, air ride, mechanical detach, GVWR 78,798, GAWR 20,280, 42" front drop, 20" rear drop angled, 20" center deck height, 102" wide,  Model 101AWD3 flip axle, good brakes, nice wood and very good tires.......

100,000 GVWR, air ride, 48' length, 10' hydraulic transition ramp to upper deck, 8' hydraulic tail with tuck under ramp, wireless remote control,  20k winch, air brakes, 3rd axle is a lift axle, 10R17.5 tires, this is a very hard to find trailer.......

Like new model T-70RG, closed tandem axle step deck, 84,640GVW, 10' upper deck, 32' lower deck, 4' beaver tail,  4' ramps, steel ramps for transition to upper deck, 101" wide,  235/75Rx17.5 tires, ABS brakes, spring suspension, 1" d-rings both sides, save on this one.....

Stock# 3146, used vacuum and soil extractor system, Kohler Command Pro 25hp engine, 476cfm Tuthill blower, 800 gal spoils tank, 200 gal water tank, tandem axle trailer, high pressure water system, hydraulic hoist on tank dump, 18 gal fuel tank, 3 inch vacuum system, these are well built systems....

used, 2000 Ring O Matic model 750 jet vacuum extractor trailer, Duetz diesel, 450cfm blower with max 14" vacuum, hydraulic dump, cat 56 triplex pressure pump 3500psi, hose reel 50' new pressure hose, new gate valves, new plungers in pressure pump, 525 gal fresh water tank, 235/75R/17.5 tires @80%, 20' new 3" suction hose, 55' of new 3" vac lines, 2 axle electric brakes, been thru the shop this is a nice unit ready to work.....

Used 2007 Circle R side dump trailer, model S433, tri-axle, air ride, rear push block, very good condition.....

never licensed, 6x12 with fold down rear ramp, side door, d-ring rails, motorcycle wheel rack, spare tire, led lights, coated steel, really nice.....

used, ex-power company unit, distribution or transmission long pulls, 6 cylinder Ford gas engine, 3 independent pilot line winder reels,  each reel loaded with 3/8 inch wire rope pilot cable, independent drum brakes, independent adjustable level winders, 24' tandem axle carrier, 20,000 ft capacity per reel, 3,500 lbs pull @ 4mph, will go thru the shop and get new paint so save big on a unit before the price is raised following reconditioning .....

135CRU Cable Reel Puller, single axle, 19,200 GVWR, 72" x 100" reels,  duetz diesel engine driven puller, 472 hours, self propelled, self loading, hydraulic steer, ex-utility unit, special built 9'6" wide for 72" reels, 14/80/R20 tires, canl have new paint and ready to work, hard to find.....

used, 3 reel self loading trailer, tandem axle, new paint, newly converted from obsolete internal reel lifts to all new hydraulic cylinder lifts, all new electric start engine driven hydraulic power pack, all new multi-bank hydraulic valve, all new hoses, independent reel lift controls, auxiliary capstan winch, 6000 lb reel capacity @ each location, GVWR 19,200lbs, 59" x 80" reel size.......

19K capacity, tandem axle, 3-84"x56" reels or 4-54"x56" reels, 36" minimum diameter, dual loading cylinders capacity of 8K reel, 2 independent hydraulic outriggers, gas engine driven hydraulics, 3 reel bars, these are built as smart and tough as they come....

2-available. Single axle reel trailers,  manual loading,  new paint
reel size 100" x 62", capacity 3200lbs.....

used, 3 Pengo PRS20-96x67-20-RW reel carriers, mounted on 1970 Hyster R35TL-TIW 35 ton tandem axle lowboy, 36" deck height, 32' bottom deck, 24" beavetail, 8' upper deck, 19" x 1' rise to upper deck,  Pengo model 20 power pak with 2 cyl Wisconsin TJD engine for hydraulic drive, 276 hours,  equipped with the optional hydraulic calipers, manual reel shaft rewind, hydraulic power shaft rewind all reels,  double jack dollies 2 spd., new paint, from power company in top condition, save 60K on this one.....

DT466- 230hp,  105k miles, 3749 hours, Fuller 63036A 6 Spd.,  19K no spin rear axle, spice 9K front drive axle, 28,000GVW,  A/C,  air brakes, rear air,  Fabco TC-38 2spd. transfer case, bench seats, partial double frame,  2-50 gal tanks, air dryer, 10R22.5 @85% tires all positions, am/fm, 170" wheel base, 66" C/A,  hard to find.

Stock #3068, used International 2674 tandem axle dump truck, Cummins M11E-310HP, Fuller 14708LL just rebuilt, new clutch, Jake, Cruise, 56K  GVW,  16F/40R, 87,248 miles, 5992 hours, Ex-Utility Company truck, 15' dump box, 10-12 yd, dual steering boxes, 192" wheel base, air gate, no spin differential,  manual tarp, hendrickson RTE2-400 spring suspension, 60% 315/80R/22.5 fronts, 95% 11R22.5 rears, sander door, rear air, rear pintle, air seat, new paint, cruise, tool box,  this is a great work truck reconditioned in our shop and looks and drives really well........

Stock # 3310, used flatbed scissor lift & dump truck, Non CDL, reman Cummins 5.9L turbo diesel 230HP, 156K miles, 6spd., 18' steel flatbed with headboard, raised bed height is 16', 48" removable stake sides, THS scissor lift and dump, bench seat, hydraulic brakes, 8500front, 17,500rear, 26,000 gvw, 225" wheel base, very good 10R22.5 tires, 2-50 gal tanks, tool box, reconditioned in out shop ready to work, new paint and new truck DOT inspection, very nice truck and hard to find, more pics soon, save on this one......

Used, ex power company truck, Only18,000 miles, 1260 hours, A/C, air brakes, 33kGVW, 10' dump box, 7 spd,  Mercedes MBE900  280HP engine, Engine brake, 90% rears, 75% fronts, cruise, air gate, air pintle, rear air, asphalt apron, sander door, air horn,  like new......

Stock # 3324, used, only 17,100 miles, A/C, hydraulic brakes, 26GVW non cdl, Valew 10' dump box, 6 spd, Cat C7 Acert Engine 190hp, 11R22.5 with 90% rears, 95% fronts, cruise, manual, pintle hitch, sander door, manual gate, asphalt apron, am/fm,  like new......

Stock # 2920, used International 4300 single axle dump truck, DT466E 225HP, 209k miles, 7 spd, air brakes, air seat, new 10' dump box, new pto & pump, new dump hoist, new rears, 85% fronts 11R22.5, rear pintle, no cdl required, this is a really nice looking and strong truck.....

Used Ex-Power Company unit, DT530 275hp., Allison 3560/WR 6spd. auto, 174K miles, Air Ride suspension, 52K GVW, 12F/40R, 226" wheel base, double frame, air dryer, engine exhaust brake, can't get much more user friendly then this one, unit is priced truck alone, Princeton D5000 piggy back lift is available in a package deal.....

used,  19,175 miles, like new,  Allison 3060 6spd auto, single axle, mechanically reconditioned & repainted in our shop, A/C,  air brakes, rear air, air seat, new truck DOT, we made this truck work ready, 26K GVWR Non-cdl, Cummins ISB 215hp, 16' steel over wood flatbed, 4' headboard, stake sides, tilt hood,  very good tires 22.5, ex-power company truck, very  very nice truck..............

used, DT466 225hp., 109k miles, 6 spd., air brakes, A/C, 25,500GVW, 25' flatbed with headboard, lift gate, 2-50gal tanks, cruise, tilt, am/fm/cassette, 253" wheel base, will have gone through the shop........ready to work

Used, 6x6, ex-power company unit, 668 hours, 3163 miles, Pengo Hydra puller model SKPLW 30-4, 4 reel carrier, auxiliary engine drive, level wind,  hendrickson spring suspension, 13spd roadranger, 6V92TA Detroit, 318HP, good condition, more info and pics soon

Used, ex-power company unit,  3 reel pto drive hydraulic puller/tensioner, tandem axle, RTO 12513 spd transmission, hendrickson spring suspension, 50KGVW, engine brake, very good tires, hard to find and in nice condition, more info and pictures to follow..........

Used Topkick single axle lube truck, non-cdl, Cat 3116, A/C, air brakes, 1-110gal tanks, 1-110gal waste oil, 2-55 gal tanks, 2-25gal fluid tanks, heads and nozzles, like new, 176k miles, ex-power company unit, 196" wheel base, Allison MT545, am/fm/cd, air hose reel, grease unit, enclosed dog house, 6 outside compartments, 2 pull out drawers, 2 underbody tool boxes, 5 work lights, 26,000GVW, Bench seat, new paint, 4-Graco Fire-Ball air pumps, vacuum pump, well cared for truck......

stock# 3319, used single axle winch bed truck, DT530E, 275HP, jake brake, A/C, 198K miles, Spicer PSO100-10spd, 18' oil field bed, live tail roll, gin poles, new 15ton hook and tailboard blocks, 3/4" winch line on 30K Tulsa winch, new paint, new gin chains and cables, A/C, 33K GVW, 12F/23R, air horns, air seat, split rear window, air operated winch controls, double frame, either start, engine heater 254" wheel base, 4.78 ratio, will have new paint, new DOT inspection and reconditioned in our shop ready for your job, rigged right with big horsepower, one of the best........

RV puller, Duramax diesel with programmable chip, Allison 5spd.auto, exhaust brake, 34K miles, leather interior, 2-air captain seats, power rear sleeper bench, dual chrome vertical exhaust stacks, DVD entertainment center, Laredo conversion, No spin differential,  very nice unit...Summer sale Price $44K

 

air driver seat, am/fm, air brakes, 5th wheel, lots of power and heavy specs.....

Used 2005 Peterbuilt 375 EXHD tractor, Cat C15 475HP, Jakes, 18spd, 280" wheel base, Hendrickson lift axle, 63” Flat top sleeper, 440,420 miles, Pete Flex Air Suspension, 3.36 Ratio, 22.5LP tires All aluminum wheels, American Class Interior, Rear Locker, Single Bunk Window in Back of Sleeper, Air right side window, Power locks, Cruise, Tilt/Tele, Dual Stacks, Dual Vortex Air cleaners, New front Bumber, Stainless Visor, wet kit.....

Used FL70 4x4 Crewcab,  ex-power company unit,  Cat 3126 250-330hp Rebuilt 6.9.06,  Allison 3060 5 spd,  121,134 miles, 4173 hours,  A/C, am/fm weatherband, dual front air seats, rear bench, 186" wheel base, 9' Dakota service body, 24" rear deck, rear air, rear pintle hitch, removable carriage rack, Front hydraulic winch with capstan, Tulsa rear hydraulic bed winch, air engage front axle, air engage Hi/Lo transfer case, air horns, cab spotlight, rear work lights, 85% rear tires 11R22.5, 90% front tires 11R22.5, electric brake controller, 31KGVW, 12F/19R axles, 75 gal tank, these are rare and this one is exceptional.....

used, DT466E 210HP, 9 spd eaton, 218" wheel base, IMT 3816  26' crane, 7500lb, hydraulic outriggers, A/C, cruise, locker rear, 13' service body, wet kit with hydraulic hose reel, oxy/accy hose reel, 194K miles, 33KGVW, air driver seat, 11R22.5 90% fronts, new rears, am/fm weatherband, air brakes, this is ready to work, been thru the shop, built right, new paint and crane inspections.....

Used tandem axle water truck, 45K miles, 1877 hours, 1283 pto hours, ex-power company truck,  Cummins N14-350hp, 58Kgvw 18k front 40k rear, hendrickson RT suspension,  4000 gal Mclellan water system, 2" power hose reel, 2 cyl Duetz diesel auxiliary engine, 4 x 3 pump, front  back and side spray bars, 8LL transmission, 425/65R/22.5 @ 60%,  11R22.5 rears @ 80%, will have new paint, this truck is as nice as they come......

Used, Ex-power company unit, 036,370 miles, DT466 210HP, Allison Mt653DR 5 spd., 31KGVW, air brakes, 188" wheel base,  Thompson 13' tank rebuilt by Beall 4/2000, U code ASME tank, will have new H138 inspection with VKI TP, thompson Model J vac pump, Auxiliary Wisconsin VG4D, Rockford Clutch, 90% rear 11R22.5, 75% front 11R22.5, 2-18" manway's,  4" rear fire valve, new paint and DOT, this is  set up nice......

Used tandem axle water truck, 28K miles, 3122 hours, ex-power company truck,  Cummins N14-330hp, jake, 8LL transmission,  58Kgvw 18F 40R, hendrickson RT suspension, Locker rearends, 4000 gal Mclellan water system, 1" power hose reel, 2 cyl Duetz diesel auxiliary engine, 4 x3 pump, 4 front spray heads 2 are street flush, 4 back spray heads 2 are street flush and side spray, 8LL transmission, 385/65R/22.5 fronts @80%, 11R22.5 rears @80%, will have new paint, this truck is built right......